eAuto Fuel Pump Assembly for Yamaha R15 V2 (2011–2017) | R15 S (2014–2017) | YZF-R15 V2 | 149cc FI
eAuto Fuel Pump Assembly for Yamaha R15 V2 (2011–2017) | R15 S (2014–2017) | YZF-R15 Version 2.0 | 149cc Liquid-Cooled FI
The eAuto fuel pump assembly is engineered for the Yamaha R15 V2 and its single-seat sibling, the R15 S. Both models share the same 149cc liquid-cooled fuel-injected platform and identical fuel tank architecture, making this a single eAuto assembly that covers the entire V2-generation R15 lineup sold in India from 2011 to 2017. Every eAuto unit is tested for correct fuel pressure output and electrical function before dispatch from eAuto.co.in.
✅ eAuto Verified Fitment — Fits These Models
| Model | Year Range | Engine |
|---|---|---|
| Yamaha YZF-R15 V2 | 2011–2017 | 149cc, Liquid-Cooled, SOHC, FI, 6-Speed |
| Yamaha YZF-R15 S | 2014–2017 | 149cc, Liquid-Cooled, SOHC, FI, 6-Speed (Single Seat Variant) |
⚠ Does NOT Fit — Do Not Order For These Models
| Model | Reason |
|---|---|
| Yamaha R15 V1 (2008–2011) | Different tank — eAuto makes a separate assembly for V1 |
| Yamaha R15 V3 BS4 (2018–2019) | 155cc platform with different tank — not compatible with V2 pump |
| Yamaha R15 V3 BS6 (2020–2021) | BS6 platform — completely different fuel system |
| Yamaha R15 V4 (2021–Present) | New generation — incompatible with V2 assembly |
| Yamaha MT-15 / FZ / FZS | Different platform and fuel system |
🔧 Technical Specifications
| Brand | eAuto — Trusted by Mechanics. Built for Riders. |
| Part Type | Fuel Pump Assembly — Complete In-Tank Module (फ्यूल पंप असेंबली / ईंधन पंप असेंबली) |
| Compatible Models | Yamaha YZF-R15 V2 | Yamaha YZF-R15 S |
| Engine | 149cc, Liquid-Cooled, SOHC, Single-Cylinder, Fuel-Injected |
| Transmission | 6-Speed Manual |
| Year Range | 2011–2017 (R15 V2) | 2014–2017 (R15 S) |
| Emission Standard | BS3 / BS4 |
| Fuel Pressure Output | ~2.0–2.5 kgf/cm² |
| Quality Standard | eAuto tested — fuel pressure output and electrical function verified before dispatch |
| Sold By | eAuto.co.in — Trusted by Mechanics. Built for Riders. |
📦 Package Contents
1 Set × eAuto Fuel Pump Assembly for Yamaha R15 V2 (2011–2017) / R15 S (2014–2017)
⚠️ When to Replace
If your Yamaha R15 V2 or R15 S is showing any of these symptoms, the fuel pump assembly may need replacement. eAuto recommends early action — V2-generation bikes are now 8–13 years old and pump wear is common.
- No priming buzz on key turn — The pump should buzz briefly every time you turn the ignition on. No buzz = pump motor failure. Most definitive sign of assembly failure on R15 V2.
- Engine won't start despite good battery — Pump failure prevents fuel reaching the injector. Engine turns over cleanly but never fires.
- Fuel gauge inaccurate or stuck — The float sensor inside the assembly degrades over time on older bikes. An inaccurate gauge is both inconvenient and a safety hazard on longer rides.
- Sputtering under hard acceleration — Weak pump pressure causes fuel starvation under high-throttle conditions — the injector doesn't get enough fuel to match engine demand.
- Engine stalls at low fuel levels — A clogged strainer concentrates sediment when the tank runs low, causing stalling at idle.
🔩 Installation Notes
Tank Access: The fuel pump is located inside the fuel tank on all R15 V2 and R15 S models. Tank removal is required for pump replacement — follow the procedure in the Yamaha service manual for your specific year.
R15 S Owners: Despite having a different single-piece seat and tail section, the R15 S uses an identical fuel tank and pump to the standard R15 V2. The eAuto assembly is a direct fit for both variants.
Connector Check: The R15 V2 generation uses a 3-pin pump connector. Verify connector type matches the eAuto unit before installation. Contact eAuto support if you have any doubts.
❓ FAQ
Q: Does this fit both R15 V2 and R15 S?
A: Yes. The R15 S is a single-seat variant of the R15 V2 and uses the same fuel tank. The eAuto assembly fits both models.
Q: What years does this cover?
A: R15 V2: 2011 to 2017. R15 S: 2014 to 2017. If your bike falls within these ranges, the eAuto assembly will fit.
Q: Will this fit my 2013 R15 V2?
A: Yes. The R15 V2 platform and fuel system were unchanged throughout the 2011–2017 production run in India.
Q: Does the R15 V2 have ABS?
A: No. The Indian R15 V2 did not come with ABS. ABS was first introduced on the R15 V3. This eAuto pump fits all R15 V2 units regardless.
Q: फ्यूल पंप / ईंधन पंप असेंबली कहाँ मिलेगी? (Where to find fuel pump assembly?)
A: eAuto.co.in पर Yamaha R15 V2 / R15 S के लिए eAuto फ्यूल पंप असेंबली (ईंधन पंप) ऑनलाइन उपलब्ध है। Free shipping और COD उपलब्ध है। | The eAuto fuel pump assembly (ईंधन पंप असेंबली) for Yamaha R15 V2 / R15 S is available online at eAuto.co.in with free shipping and COD.
eAuto ships the R15 V2 / R15 S fuel pump assembly across India — Delhi, Mumbai, Bangalore, Chennai, Hyderabad, Pune, Kolkata and all pin codes. Read verified eAuto customer reviews, check the best price, and order with free shipping + COD at eAuto.co.in. eAuto — Trusted by Mechanics. Built for Riders.
*Product image is representative. Actual eAuto product may vary slightly in appearance. Always verify your exact model, variant, and year before ordering. eAuto — Trusted by Mechanics. Built for Riders. | eAuto.co.in
eAuto Fuel Pump Assembly for Yamaha R15 V2 (2011–2017) | R15 S (2014–2017) | YZF-R15 Version 2.0 | 149cc Liquid-Cooled FI
The eAuto fuel pump assembly is engineered for the Yamaha R15 V2 and its single-seat sibling, the R15 S. Both models share the same 149cc liquid-cooled fuel-injected platform and identical fuel tank architecture, making this a single eAuto assembly that covers the entire V2-generation R15 lineup sold in India from 2011 to 2017. Every eAuto unit is tested for correct fuel pressure output and electrical function before dispatch from eAuto.co.in.
✅ eAuto Verified Fitment — Fits These Models
| Model | Year Range | Engine |
|---|---|---|
| Yamaha YZF-R15 V2 | 2011–2017 | 149cc, Liquid-Cooled, SOHC, FI, 6-Speed |
| Yamaha YZF-R15 S | 2014–2017 | 149cc, Liquid-Cooled, SOHC, FI, 6-Speed (Single Seat Variant) |
⚠ Does NOT Fit — Do Not Order For These Models
| Model | Reason |
|---|---|
| Yamaha R15 V1 (2008–2011) | Different tank — eAuto makes a separate assembly for V1 |
| Yamaha R15 V3 BS4 (2018–2019) | 155cc platform with different tank — not compatible with V2 pump |
| Yamaha R15 V3 BS6 (2020–2021) | BS6 platform — completely different fuel system |
| Yamaha R15 V4 (2021–Present) | New generation — incompatible with V2 assembly |
| Yamaha MT-15 / FZ / FZS | Different platform and fuel system |
🔧 Technical Specifications
| Brand | eAuto — Trusted by Mechanics. Built for Riders. |
| Part Type | Fuel Pump Assembly — Complete In-Tank Module (फ्यूल पंप असेंबली / ईंधन पंप असेंबली) |
| Compatible Models | Yamaha YZF-R15 V2 | Yamaha YZF-R15 S |
| Engine | 149cc, Liquid-Cooled, SOHC, Single-Cylinder, Fuel-Injected |
| Transmission | 6-Speed Manual |
| Year Range | 2011–2017 (R15 V2) | 2014–2017 (R15 S) |
| Emission Standard | BS3 / BS4 |
| Fuel Pressure Output | ~2.0–2.5 kgf/cm² |
| Quality Standard | eAuto tested — fuel pressure output and electrical function verified before dispatch |
| Sold By | eAuto.co.in — Trusted by Mechanics. Built for Riders. |
📦 Package Contents
1 Set × eAuto Fuel Pump Assembly for Yamaha R15 V2 (2011–2017) / R15 S (2014–2017)
⚠️ When to Replace
If your Yamaha R15 V2 or R15 S is showing any of these symptoms, the fuel pump assembly may need replacement. eAuto recommends early action — V2-generation bikes are now 8–13 years old and pump wear is common.
- No priming buzz on key turn — The pump should buzz briefly every time you turn the ignition on. No buzz = pump motor failure. Most definitive sign of assembly failure on R15 V2.
- Engine won't start despite good battery — Pump failure prevents fuel reaching the injector. Engine turns over cleanly but never fires.
- Fuel gauge inaccurate or stuck — The float sensor inside the assembly degrades over time on older bikes. An inaccurate gauge is both inconvenient and a safety hazard on longer rides.
- Sputtering under hard acceleration — Weak pump pressure causes fuel starvation under high-throttle conditions — the injector doesn't get enough fuel to match engine demand.
- Engine stalls at low fuel levels — A clogged strainer concentrates sediment when the tank runs low, causing stalling at idle.
🔩 Installation Notes
Tank Access: The fuel pump is located inside the fuel tank on all R15 V2 and R15 S models. Tank removal is required for pump replacement — follow the procedure in the Yamaha service manual for your specific year.
R15 S Owners: Despite having a different single-piece seat and tail section, the R15 S uses an identical fuel tank and pump to the standard R15 V2. The eAuto assembly is a direct fit for both variants.
Connector Check: The R15 V2 generation uses a 3-pin pump connector. Verify connector type matches the eAuto unit before installation. Contact eAuto support if you have any doubts.
❓ FAQ
Q: Does this fit both R15 V2 and R15 S?
A: Yes. The R15 S is a single-seat variant of the R15 V2 and uses the same fuel tank. The eAuto assembly fits both models.
Q: What years does this cover?
A: R15 V2: 2011 to 2017. R15 S: 2014 to 2017. If your bike falls within these ranges, the eAuto assembly will fit.
Q: Will this fit my 2013 R15 V2?
A: Yes. The R15 V2 platform and fuel system were unchanged throughout the 2011–2017 production run in India.
Q: Does the R15 V2 have ABS?
A: No. The Indian R15 V2 did not come with ABS. ABS was first introduced on the R15 V3. This eAuto pump fits all R15 V2 units regardless.
Q: फ्यूल पंप / ईंधन पंप असेंबली कहाँ मिलेगी? (Where to find fuel pump assembly?)
A: eAuto.co.in पर Yamaha R15 V2 / R15 S के लिए eAuto फ्यूल पंप असेंबली (ईंधन पंप) ऑनलाइन उपलब्ध है। Free shipping और COD उपलब्ध है। | The eAuto fuel pump assembly (ईंधन पंप असेंबली) for Yamaha R15 V2 / R15 S is available online at eAuto.co.in with free shipping and COD.
eAuto ships the R15 V2 / R15 S fuel pump assembly across India — Delhi, Mumbai, Bangalore, Chennai, Hyderabad, Pune, Kolkata and all pin codes. Read verified eAuto customer reviews, check the best price, and order with free shipping + COD at eAuto.co.in. eAuto — Trusted by Mechanics. Built for Riders.
*Product image is representative. Actual eAuto product may vary slightly in appearance. Always verify your exact model, variant, and year before ordering. eAuto — Trusted by Mechanics. Built for Riders. | eAuto.co.in
Original: $32.00
-70%$32.00
$9.60Description
eAuto Fuel Pump Assembly for Yamaha R15 V2 (2011–2017) | R15 S (2014–2017) | YZF-R15 Version 2.0 | 149cc Liquid-Cooled FI
The eAuto fuel pump assembly is engineered for the Yamaha R15 V2 and its single-seat sibling, the R15 S. Both models share the same 149cc liquid-cooled fuel-injected platform and identical fuel tank architecture, making this a single eAuto assembly that covers the entire V2-generation R15 lineup sold in India from 2011 to 2017. Every eAuto unit is tested for correct fuel pressure output and electrical function before dispatch from eAuto.co.in.
✅ eAuto Verified Fitment — Fits These Models
| Model | Year Range | Engine |
|---|---|---|
| Yamaha YZF-R15 V2 | 2011–2017 | 149cc, Liquid-Cooled, SOHC, FI, 6-Speed |
| Yamaha YZF-R15 S | 2014–2017 | 149cc, Liquid-Cooled, SOHC, FI, 6-Speed (Single Seat Variant) |
⚠ Does NOT Fit — Do Not Order For These Models
| Model | Reason |
|---|---|
| Yamaha R15 V1 (2008–2011) | Different tank — eAuto makes a separate assembly for V1 |
| Yamaha R15 V3 BS4 (2018–2019) | 155cc platform with different tank — not compatible with V2 pump |
| Yamaha R15 V3 BS6 (2020–2021) | BS6 platform — completely different fuel system |
| Yamaha R15 V4 (2021–Present) | New generation — incompatible with V2 assembly |
| Yamaha MT-15 / FZ / FZS | Different platform and fuel system |
🔧 Technical Specifications
| Brand | eAuto — Trusted by Mechanics. Built for Riders. |
| Part Type | Fuel Pump Assembly — Complete In-Tank Module (फ्यूल पंप असेंबली / ईंधन पंप असेंबली) |
| Compatible Models | Yamaha YZF-R15 V2 | Yamaha YZF-R15 S |
| Engine | 149cc, Liquid-Cooled, SOHC, Single-Cylinder, Fuel-Injected |
| Transmission | 6-Speed Manual |
| Year Range | 2011–2017 (R15 V2) | 2014–2017 (R15 S) |
| Emission Standard | BS3 / BS4 |
| Fuel Pressure Output | ~2.0–2.5 kgf/cm² |
| Quality Standard | eAuto tested — fuel pressure output and electrical function verified before dispatch |
| Sold By | eAuto.co.in — Trusted by Mechanics. Built for Riders. |
📦 Package Contents
1 Set × eAuto Fuel Pump Assembly for Yamaha R15 V2 (2011–2017) / R15 S (2014–2017)
⚠️ When to Replace
If your Yamaha R15 V2 or R15 S is showing any of these symptoms, the fuel pump assembly may need replacement. eAuto recommends early action — V2-generation bikes are now 8–13 years old and pump wear is common.
- No priming buzz on key turn — The pump should buzz briefly every time you turn the ignition on. No buzz = pump motor failure. Most definitive sign of assembly failure on R15 V2.
- Engine won't start despite good battery — Pump failure prevents fuel reaching the injector. Engine turns over cleanly but never fires.
- Fuel gauge inaccurate or stuck — The float sensor inside the assembly degrades over time on older bikes. An inaccurate gauge is both inconvenient and a safety hazard on longer rides.
- Sputtering under hard acceleration — Weak pump pressure causes fuel starvation under high-throttle conditions — the injector doesn't get enough fuel to match engine demand.
- Engine stalls at low fuel levels — A clogged strainer concentrates sediment when the tank runs low, causing stalling at idle.
🔩 Installation Notes
Tank Access: The fuel pump is located inside the fuel tank on all R15 V2 and R15 S models. Tank removal is required for pump replacement — follow the procedure in the Yamaha service manual for your specific year.
R15 S Owners: Despite having a different single-piece seat and tail section, the R15 S uses an identical fuel tank and pump to the standard R15 V2. The eAuto assembly is a direct fit for both variants.
Connector Check: The R15 V2 generation uses a 3-pin pump connector. Verify connector type matches the eAuto unit before installation. Contact eAuto support if you have any doubts.
❓ FAQ
Q: Does this fit both R15 V2 and R15 S?
A: Yes. The R15 S is a single-seat variant of the R15 V2 and uses the same fuel tank. The eAuto assembly fits both models.
Q: What years does this cover?
A: R15 V2: 2011 to 2017. R15 S: 2014 to 2017. If your bike falls within these ranges, the eAuto assembly will fit.
Q: Will this fit my 2013 R15 V2?
A: Yes. The R15 V2 platform and fuel system were unchanged throughout the 2011–2017 production run in India.
Q: Does the R15 V2 have ABS?
A: No. The Indian R15 V2 did not come with ABS. ABS was first introduced on the R15 V3. This eAuto pump fits all R15 V2 units regardless.
Q: फ्यूल पंप / ईंधन पंप असेंबली कहाँ मिलेगी? (Where to find fuel pump assembly?)
A: eAuto.co.in पर Yamaha R15 V2 / R15 S के लिए eAuto फ्यूल पंप असेंबली (ईंधन पंप) ऑनलाइन उपलब्ध है। Free shipping और COD उपलब्ध है। | The eAuto fuel pump assembly (ईंधन पंप असेंबली) for Yamaha R15 V2 / R15 S is available online at eAuto.co.in with free shipping and COD.
eAuto ships the R15 V2 / R15 S fuel pump assembly across India — Delhi, Mumbai, Bangalore, Chennai, Hyderabad, Pune, Kolkata and all pin codes. Read verified eAuto customer reviews, check the best price, and order with free shipping + COD at eAuto.co.in. eAuto — Trusted by Mechanics. Built for Riders.
*Product image is representative. Actual eAuto product may vary slightly in appearance. Always verify your exact model, variant, and year before ordering. eAuto — Trusted by Mechanics. Built for Riders. | eAuto.co.in
